Middlesboro/Bell County (1A6) has 1 runway. Runway 10/28 is 3,633 ft long and 75 ft wide. The surface is asphalt. The runway headings are 98° and 278° magnetic. No ILS runway ends are published for this field.
There is no control tower. Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement or ATC instructions say otherwise. No runway-specific noise abatement notes are published. No LAHSO notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at 1A6.
Pattern entry · RWY 28
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for 1A6. For light piston aircraft, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement or local instructions say otherwise. There is no control tower, so pilots self-announce and self-sequence in the pattern. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.