Runways · 16D

Runways at Perham Muni, headings, length, surface and ILS (16D)

PERHAM MUNI · PERHAM, MINNESOTA

Runway system
Non-towered
1
runway
Longest
4,102 ft
ILS
None
Surface
ASPH

Perham Muni (16D) has 1 runway. Runway 13/31 is 4,102 ft long and 75 ft wide. The surface is asphalt. The runway headings are 130° and 310° magnetic. The field elevation is 1,376 ft MSL.

This airport does not have a control tower. No ILS runway ends are published. No LAHSO notes are published. No noise abatement notes are published. For the current runway picture and winds, check aviationweather for live METAR/TAF before departure.

Wind & favored runway

Favored end is picked from the current METAR wind at 16D.

Runway & wind

tap a runway
310° · 13 kt
RWY 31
308°M
Head/Tail
+13 kt
Crosswind
0 kt

Pattern entry · RWY 31

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 31 · 308° · LEFT TRAFFICPattern 2,376 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
13/31128° / 308°4,102 ft75 ftASPHStandard L

Traffic pattern

Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. With no control tower, self-announce and keep your scan tight. Runway 13/31 is the only runway, so pattern work will center on that strip. No right-traffic exception is published in the facts. No special pattern notes are published.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 16D have?
16D has 1 runway.
What is the longest runway at Perham Muni?
Runway 13/31 is the longest runway. It is 4,102 ft long.
What surface is the runway at 16D?
The runway surface is asphalt.
Does 16D have any ILS runway ends?
No ILS runway ends are published for 16D.
Is Perham Muni towered?
No. 16D does not have a control tower.
What are the runway headings at 16D?
Runway 13/31 has magnetic headings of 130° and 310°.
16D runways, headings, length, surface