Belle Glade State Muni (X10) has 1 runway. Runway 09/27 is 3,449 ft long and 60 ft wide. The surface is asphalt. The runway headings are 090° and 270° magnetic. No ILS runway ends are published for this field.
This is a non-towered airport. No control tower is listed. Pattern altitude is not published. For pattern work, use standard 1,000 ft AGL for light piston aircraft unless local procedures say otherwise. No LAHSO notes are published. No noise abatement notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at X10.
Pattern entry · RWY 09
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston aircraft unless local procedures say otherwise. X10 is non-towered, so pilots self-announce and self-sequence in the pattern. The only runway listed is 09/27. That means pattern work will center on that single strip unless local traffic or wind calls for a different flow. No right-traffic exception is published. No special pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.