Fulton County (NY0) in Johnstown, New York has 1 runway. Runway 10/28 is 4,000 ft long and 75 ft wide. The surface is asphalt. The runway headings are 89° and 269° magnetic. No ILS runway ends are published. No LAHSO notes are published. No noise abatement notes are published.
This is an uncontrolled field. There is no control tower. Pilots should use the current FAA Chart Supplement for airport details and check aviationweather for live METAR and TAF before departure. The runway layout is simple. One strip. One surface. One published length.
Wind & favored runway
Favored end is picked from the current METAR wind at NY0.
Pattern entry · RWY 10
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use the standard 1,000 ft AGL pattern unless local procedures or traffic require otherwise. Field elevation is 880.8 ft MSL, so a 1,000 ft AGL pattern is about 1,880.8 ft MSL. There is no control tower, so pilots self-announce and sequence visually. No right-traffic exceptions are published. No special pattern notes are published in the facts.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.