Thompson Falls (KTHM) in Thompson Falls, Montana has 1 runway. Runway 08/26 is 4,200 ft long and 75 ft wide. The surface is asphalt. Magnetic headings are 90° and 270°. No ILS runway ends are published for this airport.
This is a non-towered field. Tower service is not available. Pattern altitude is not published, so the standard 1,000 ft AGL pattern is the practical reference for light piston operations. Field elevation is 2,467.1 ft MSL, so plan your circuit and performance with density altitude in mind. No runway-specific noise abatement notes are published. No LAHSO notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at KTHM.
Pattern entry · RWY 08
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for KTHM. For light piston operations, use the standard 1,000 ft AGL pattern reference. Field elevation is 2,467.1 ft MSL. That puts a typical pattern around 3,467 ft MSL. The airport has no control tower, so pilots self-announce and sequence visually. Only one runway is published. Runway 08/26 is the only pattern choice in the facts provided. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.