Tulsa Riverside Airport (KRVS) has 3 asphalt runways. The longest is 01L/19R at 5,101 ft by 100 ft. The shortest is 13/31 at 2,639 ft by 50 ft. Runway 01R/19L is 4,205 ft by 100 ft. Runway headings are 13°/193° for 01R/19L and 01L/19R. Runway 13/31 is 133°/313°. The field elevation is 638.2 ft MSL. A control tower is in service from 0700 to 2200. ILS is published for runway 01L. Noise abatement procedures prohibit turns on departure prior to 1500 ft MSL. That matters for departure planning and initial climb. Check the current FAA Chart Supplement for the latest airport remarks before you go.
Wind & favored runway
Favored end is picked from the current METAR wind at KRVS.
Pattern entry · RWY 01L
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless ATC assigns something different. Field elevation is 638.2 ft MSL, so that puts a standard pattern near 1,638 ft MSL. The airport has a control tower from 0700 to 2200. Expect ATC to sequence traffic in the pattern during those hours. Right traffic is published for runway 01R. Right traffic is also published for runway 19R. Right traffic is published for runway 31. The noise abatement note is important. Do not plan departure turns before 1500 ft MSL.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.