Runway 10 at Genesee County in Batavia, New York is the eastbound end of the runway. The opposite end is Runway 28. Runway 10 has a magnetic heading of 91°. Length is 5,499 ft. Surface is asphalt. Pattern direction is left traffic, which is the standard pattern for this end. No ILS is published for Runway 10 at KGVQ, the ICAO identifier for Genesee County. Field elevation is 913.5 ft MSL. Threshold elevation for Runway 10 is 911.6 ft MSL. Check the current FAA Chart Supplement for NOTAM and runway condition before departure.
Wind component for Runway 10
Based on the current METAR wind at KGVQ.
- Headwind
- 5.0 kt
- Crosswind
- 13.1 kt RIGHT
- Rel. angle
- 69°
- Favorability
- marginal
Pattern entry · RWY 10
LEFT TRAFFICTraffic pattern · Runway 10
LEFT-hand pattern on the south/east side. Uncontrolled field. Announce position on CTAF and self-separate.
- Upwind: climb runway heading 80°M
- Crosswind: turn left to 350°M
- Downwind: parallel runway, opposite direction (260°M)
- Base: perpendicular to runway
- Final: align with 80°M for Runway 10
Frequently asked questions
What is the heading of runway 10 at KGVQ?
Runway 10 has a magnetic heading of 91°. That is the published heading for this end at Genesee County.
Is runway 10 at KGVQ left or right traffic?
Runway 10 uses left traffic. That is the standard pattern direction for this end.
What is the length of runway 10 at KGVQ?
Runway 10 is 5,499 ft long.
What is the surface of runway 10 at KGVQ?
The surface is asphalt.
Does runway 10 have an ILS approach at KGVQ?
No ILS is published for Runway 10 at KGVQ.
What is the opposite end of runway 10 at KGVQ?
The opposite end is Runway 28.