Calhoun County in Blountstown, Florida has 1 runway. Runway 18/36 is 3,729 ft long and 75 ft wide. The surface is asphalt. The field elevation is 121.2 ft MSL. No control tower is published for the field. No ILS runway ends are published.
For planning, this is a simple single-runway layout. The runway headings are 180° and 360° magnetic. No LAHSO notes are published. No noise abatement notes are published. Check the current FAA Chart Supplement for the latest published airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at F95.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston operations unless local procedure says otherwise. The field elevation is 121.2 ft MSL, so that puts a standard pattern near 1,121 ft MSL. No tower is published for the airport, so pilots should self-announce and fly a normal non-towered traffic pattern. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.