BLOOMFIELD MUNI in Bloomfield, Iowa has 1 runway. Runway 18/36 is 3,401 ft long and 60 ft wide. The surface is concrete. Runway headings are 179° and 359° magnetic. The field elevation is 888 ft MSL. No control tower is listed, so use standard non-towered procedures and self-announce on CTAF as appropriate.
No ILS runway ends are published for 4K6. No LAHSO notes are published. No noise abatement notes are published. For current airport details, use the current FAA Chart Supplement.
Wind & favored runway
Favored end is picked from the current METAR wind at 4K6.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL for light piston aircraft unless local procedures or ATC say otherwise. Since 4K6 has no control tower, pilots sequence themselves in the pattern. Expect normal non-towered traffic calls and good lookout discipline.
No right-traffic exception is published. No special pattern note is published for runway 18/36. Fly the published or standard pattern that fits the wind and traffic flow. Keep spacing tight enough for a clean self-sequence, but leave room for other aircraft.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.