Youngstown Elser Metro (4G4) has 1 runway. Runway 10/28 is 4,012 ft long and 50 ft wide. The surface is asphalt. Magnetic headings are 90° for Runway 10 and 270° for Runway 28. No ILS runway ends are published. This is an uncontrolled field with no control tower. Pattern altitude is not published. For light piston traffic, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement or local procedures say otherwise. No LAHSO notes are published. No runway-specific noise abatement notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at 4G4.
Pattern entry · RWY 10
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for 4G4. For light piston operations, use the standard 1,000 ft AGL pattern unless local guidance says otherwise. The field is uncontrolled, so pilots self-announce and sequence visually. Runway 10/28 is the only runway. That keeps pattern planning simple. No right-traffic exception is published. No runway-specific pattern note is published in the facts. Check the current FAA Chart Supplement before flight for any local updates.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.