ATMORE MUNI (0R1) has 1 runway. Runway 18/36 is 5,001 ft long and 80 ft wide. The surface is asphalt. That makes the runway setup simple for preflight planning. No ILS runway ends are published for 0R1.
This is an uncontrolled field. There is no control tower. Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures or ATC instructions say otherwise. No runway-specific noise abatement notes are published. No LAHSO notes are published either. Check the current FAA Chart Supplement before flight for the latest airport data.
Wind & favored runway
Favored end is picked from the current METAR wind at 0R1.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for 0R1. For light piston traffic, use the standard 1,000 ft AGL pattern unless local procedures say otherwise. There is no control tower, so pilots self-announce and sequence visually. No right-traffic exceptions are published. No runway-specific pattern notes are published. Use normal non-towered traffic flow discipline and verify the current FAA Chart Supplement before departure.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.