Runway 28 at KBVI is the westbound end at Beaver County Airport in Beaver Falls, Pennsylvania. The opposite end is Runway 10. Runway 28 has a magnetic heading of 274° and a length of 4,501 ft. Surface is asphalt. Pattern direction is left traffic. No ILS is published for this runway end. KBVI is the ICAO identifier for Beaver County. The airport has a control tower.
Threshold elevation for Runway 28 is 1,252.7 ft MSL. Use the current FAA Chart Supplement for current NOTAM and runway condition before departure.
Wind component for Runway 28
Based on the current METAR wind at KBVI.
- Headwind
- -4.1 kt
- Crosswind
- 9.1 kt LEFT
- Rel. angle
- 114°
- Favorability
- challenging
Pattern entry · RWY 10
LEFT TRAFFICTraffic pattern · Runway 28
LEFT-hand pattern on the north/west side. Tower-controlled. Follow ATC instructions for pattern entry.
- Upwind: climb runway heading 267°M
- Crosswind: turn left to 177°M
- Downwind: parallel runway, opposite direction (87°M)
- Base: perpendicular to runway
- Final: align with 267°M for Runway 28
Frequently asked questions
What is the heading of Runway 28 at KBVI?
Runway 28 has a magnetic heading of 274°. That is the published heading for this end.
Is Runway 28 at KBVI left or right traffic?
Runway 28 uses left traffic. That is the standard pattern direction in the facts provided.
What is the length of Runway 28 at KBVI?
Runway 28 is 4,501 ft long. Width is 100 ft.
What is the surface of Runway 28 at KBVI?
Runway 28 has an asphalt surface. The surface code in the facts is ASPH.
Does Runway 28 have an ILS approach at KBVI?
No ILS is published for Runway 28 at KBVI. Check the published IAP for current approach details.
What is the opposite end of Runway 28 at KBVI?
The opposite end is Runway 10. Runway 28 is the reciprocal end at Beaver County Airport.