Washington Muni (KAWG) in Washington, Iowa has 2 runways. The longest is Runway 18/36 at 4,000 ft by 75 ft, with a concrete surface. Runway 13/31 is 3,401 ft by 60 ft, also concrete. No ILS runway ends are published for this field. The airport is not towered, so pilots should self-announce and coordinate traffic on CTAF. No runway-specific noise abatement notes are published. The runway layout gives you a north-south option on 18/36 and a northwest-southeast option on 13/31. Check the current FAA Chart Supplement before flight for the latest airport data.
Wind & favored runway
Favored end is picked from the current METAR wind at KAWG.
Pattern entry · RWY 31
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures or ATC say otherwise. That puts the pattern near 1,754 ft MSL at this field elevation of 754.4 ft MSL. The airport is non-towered, so pilots sequence themselves in the pattern. No right-traffic exceptions are published. No special pattern notes are published for either runway.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.